1. Eeepc Sci Raid Host Controller Driver
  2. Eeepc Sci Raid Host Controller Driver Download
  3. Eeepc Sci Raid Host Controller Download

For those who don’t care for the learning adventure, justThis evening, I was bemused to find a Linux live disk unable to identify the storage volume on my new Dell XPS 13 laptop. A quick search introduced me to a problem I have not encountered before; the SSD was likely configured to use a SATA controller mode that did not have a driver in the kernel of the live disk installer. This is typically when the stock disk has been shipped in either IDE (for backwards compatibility purposes) or a vendor specific RAID mode, instead of the native Advanced Host Controller Interface ( AHCI) that exposes some of SATAs more advanced features.One can easily change this setting in the BIOS. On my XPS I had to navigate to System Configuration SATA Configuration and switch the radio button selection from RAID On to AHCI. A rather scary warning informed me that this would more than likely break my existing partitions. As a curious scientist with a recovery partition as a safety net, I decided to proceed anyway. Unsurprisingly, Windows 10 failed to boot, electing to display the dreaded sideways smiley face and a suggestion that I read up about the INACCESSIBLEBOOTDEVICE error.

Oops.It turns out, to optimize boot times, Windows disables drivers that are deemed unnecessary for startup during installation. Herein lies the problem, if the OS is installed while the disk is in one of these other modes (in my case RAID), the driver that would allow us to speak AHCI to our speaking AHCI-speaking SATA storage controller is effectively disabled (even though it is installed). Windows, without the ability to communicate with the disk correctly, has no real option but to fall on its side with a glum expression and throw the INACCESSIBLEBOOTDEVICE error during startup.

The accusations are corroborated by the:Some operating systems, notably Windows Vista, Windows 7, Windows 8 and Windows 10 do not configure themselves to load the AHCI driver upon boot if the SATA-drive controller was not in AHCI mode at the time of installation. This can cause failure to boot, with an error message, if the SATA controller is later switched to AHCI mode.So what are we to do?

Eeepc Sci Raid Host Controller Driver

Eeepc sci raid host controller 2017

If I want to install and run Linux, I need my SSD’s SATA controller to be set to AHCI. Yet if I want to dual-boot with Windows, I need to use RAID to match the currently installed Intel vendor driver. A conundrum!Official advice from vendors like Intel is that you should format the disk, set the controller mode as desired and then reinstall the Windows operating system. But this seems somewhat of a cop out, what if lazy people like me don’t have physical installation media to hand, or don’t want to go through the hassle of a format and reinstall? Evidently, I am not the first to ask this question; as there are many threads online that attempt to achieve this for Windows 10, with varying degrees of success garnered from to merely.Confusingly, according to the:Intel recommends choosing RAID mode on their (which also enables AHCI) rather than AHCI/SATA mode for maximum flexibility.If this really is the case, why doesn’t our trusty Linux live disk installer identify the dual-wielding AHCI and RAID disk in question?

Sci

Eeepc Sci Raid Host Controller Driver Download

SCSI/RAID Host Controller Drivers Download. Description: Scan your system for out-of-date and missing drivers File Version: 8.5 File Size: 2.33M Supported OS: Windows 10, Windows 8.1, Windows 7, Windows Vista, Windows XP.

Eeepc Sci Raid Host Controller Download

  1. I always had the first JMicron Controller, and the other device in the SCSI/RAID tab was SCSI/RAID Host controller (the one with the problem), but now that I updated the driver the SCSI/RAID Host controller changed to JMicron JMB36X Controller, so now I have two JMicron JMB36X controllers.
  2. The Dell™ PERC (PowerEdge™ RAID Controller) family of enterprise-class controllers is designed for enhanced performance, increased reliability, fault tolerance, and simplified management — providing a powerful, easy-to-manage way to create a robust infrastructure and help maximize server uptime.

I wisely chose to stop at the entrance to the rabbit hole on this occasion and was just happy I could move on with my Linux installation.Other articles exist for Windows 7 and Windows 8 too, but are generally disregarded as unhelpful for Windows 10. In particular, the default AHCI driver provided by Microsoft changed name between versions 7 and 8, so much of the advice pertains to registry keys and files that don’t exist if followed for versions 8 and 10.A more specific driver from your vendor may be available for your storage controller.